The controller must be paired with a 2.4 GHz Wi-Fi network. Do not leave the skimmer unattended until the float test and shut-off have both been validated.
Before you start
Pairing followed by a functional test.
After pairing, activate the float by hand and check both the notification and the skimmer shut-off.
Download the official app from your mobile app store.
Tuya Smart setup
Follow the steps in order.
Connect the power supply
Power the controller and wait a few seconds.
Enter pairing mode
The blue light must flash quickly. If not, hold the button for about 8 seconds.
Install Tuya Smart
Install the app on your phone before adding the device.
Add the device
Tap + and follow the wizard using your 2.4 GHz Wi-Fi.
Test the float
Activate the float with your finger: you should receive a notification and the skimmer should switch off.
Tuya pairing help
Video reference for first setup.
Quick troubleshooting
Simple checks before contacting support.
I do not receive a notification
Check that the controller is correctly added in Tuya Smart and that app notifications are allowed.
The skimmer does not switch off during the test
Repeat pairing and check that the skimmer is connected to the intended socket or controller.
Checklist before commissioning
Validate these points before leaving the system unattended.
Check
- Blue light flashing quickly during pairing.
- Tuya Smart installed.
- 2.4 GHz Wi-Fi used.
- Notification received during float test.
- Skimmer correctly switched off during the test.
Avoid
- Skipping the float test.
- Using a 5 GHz network for pairing.
- Leaving the system in operation if the skimmer does not switch off.
Need personalised help?
Tell us the exact model, describe the behaviour you observe and, if possible, attach a photo or short video of the installation.