Wi-Fi reef wavemaker oscillator

CP-SWEEP BORA rotating mount and oscillator for reef circulation pumps

Make your flow move.

Turn a fixed wavemaker into a dynamic reef flow system. CP-SWEEP gradually changes the direction of the flow across the aquarium and gives you control over angle, speed, scheduling and flow profiles.

Configure my CP-SWEEP
0–180° rotation Wi-Fi built in Advanced scheduling Jebao compatible*
CP-SWEEP · CONTROL
CP-SWEEP BORA control interface for a reef wavemaker
180°maximum angle
Wi-Fino app required
Adjustable rotationFrom 0 to 180°
Automatic repositioningAfter a power cut or manual movement
Local controlSmartphone, tablet or PC
Made in FranceDesigned by CoralPlast
How it works

A reef is never static.

A fixed wavemaker always pushes water in the same direction. CP-SWEEP gradually changes its orientation to spread flow across a much wider area of the reef tank.

The goal is not simply to add more flow, but to make better use of the flow you already have: move water around the aquascape, vary how corals are exposed to current and reduce dead spots where detritus tends to settle.

✓More varied, better distributed flow throughout the reef tank.
✓Sweep angle tailored to your aquascape and coral needs.
✓Set the centre, limits and speed directly from the Wi-Fi interface.
Setting the sweep zone of a reef wavemaker with CP-SWEEP BORA
Angle and speed control of the CP-SWEEP BORA reef wavemaker oscillator
Live demo

Try the interface before you even install it.

Open the real CP-SWEEP demo in an immersive window and explore the control experience on desktop or mobile.

Open in a new tab
CP-SWEEP BORA web interface for reef flow control
Real movement of the CP-SWEEP BORA oscillator with a reef wavemaker
Controlled movement

Up to 180°, at your pace.

Set both sweep limits, the centre point and the speed. The movement follows your settings and the travel time genuinely adapts to the selected speed.

Adjustable sweep0 → 180°
Position around centreup to ±90°
Repositioningautomatic
Scheduling

Your flow can change throughout the day.

Create multiple time slots and automatically change CP-SWEEP behaviour depending on the time of day.

Use a gentler sweep at night, a wider range during the day or targeted movement at selected times. Scheduling keeps the reef flow dynamic without constant manual adjustments.

✓Multiple configurable time slots within the same day.
✓Different angle and movement settings for each time period.
✓Clear overview directly from the web interface.
Reef flow scheduling in the CP-SWEEP BORA interface
Setting a CP-SWEEP BORA schedule period for a reef aquarium
Full scheduling view of the CP-SWEEP BORA wavemaker oscillator
CP-SWEEP flow presets with compatible Jebao wavemaker control
Custom movement and flow profiles in CP-SWEEP BORA
Integrated control

The oscillator and wavemaker can work together.

With compatible Jebao wavemakers, CP-SWEEP can coordinate the oscillator movement and pump output from the same interface.

Create flow profiles that combine direction, sweep movement, scheduling and the settings available on the compatible wavemaker. This lets you build more natural and dynamic flow patterns than a simple repeated mechanical movement.

✓Custom profiles that can be saved and recalled from the interface.
✓Movement coordinated with compatible Jebao wavemakers.
✓Centralised control from the CP-SWEEP controller.

* Compatibility depends on the Jebao model and protocol. Check compatibility before ordering.

Designed for real-world reef keeping

Easy to use. Serious engineering inside.

CP-SWEEP BORA brings mechanics, electronics and software together in a system designed for everyday use around a marine reef aquarium.

Stepper motor

Progressively controlled movement for precise sweep control.

4:1 reduction gearbox

Mechanical architecture designed to deliver smooth movement with suitable torque.

Built-in Wi-Fi

Local browser-based control with no proprietary app required.

Position recovery

Automatic repositioning after a power cut or movement while powered off.

Adaptable installation

Designed to fit your reef tank.

01

Vertical mounting

Mounts on glass up to 20 mm thick. Custom dimensions can be made on request.

02

Horizontal mounting

Can be mounted on a eurobrace or horizontal brace up to 15 mm, depending on the setup.

03

Customisable arm

20 mm pressure-PVC arm, customisable up to 50 cm and easy to trim if required.

In action

See CP-SWEEP in motion.

A demonstration says more than a long explanation: see how the system works on a reef aquarium.

Frequently asked questions

Before choosing your wavemaker oscillator.

What does a wavemaker oscillator do in a reef aquarium?

It automatically changes the direction of flow produced by a wavemaker. Instead of pushing water in the same direction all the time, the pump sweeps across a wider area, helping to vary circulation around the aquascape and corals.

What rotation range does CP-SWEEP BORA offer?

The rotation range is adjustable up to 180°. The limits and centre point can be tailored to the tank shape, aquascape and the area you want to cover.

Do I need to install an app to control CP-SWEEP?

No. The control interface runs in a web browser on a smartphone, tablet or computer. The controller provides its own Wi-Fi access point and can also be connected to your home network for supported functions.

Can CP-SWEEP control a Jebao wavemaker?

Yes, with Jebao wavemakers that support the compatible protocol. CP-SWEEP can coordinate oscillator movement with the pump settings available on the compatible model. Compatibility must be checked for the exact wavemaker.

Is CP-SWEEP BORA an alternative to TUNZE ORCA MK2 and NEO3PLUS oscillators?

Yes. These are alternative systems for changing the direction of a circulation pump. The right choice depends on the exact pump model, mounting requirements and the control functions you need.

CP-SWEEP BORA provides an adjustable sweep up to 180°, a stepper motor with a 4:1 reduction gearbox, position control, a local Wi-Fi interface, scheduling and automatic repositioning. Electronic control of a Jebao pump requires a compatible model.

CoralPlast can adapt the arm length, pump mount and attachment for many installations, including eurobraces, reinforcement bars, limited spaces and mesh covers.

For a fair comparison, check supported pumps, included components, required adapters, controller functions, warranty and the current total price of each complete configuration.

How do I choose the right mount or adapter?

Measure the glass or brace thickness, available space, required arm length and the exact wavemaker model. If you are unsure, send CoralPlast a photo of the installation so the correct setup can be confirmed.

CP-SWEEP BORA

Your wavemaker already creates the flow.
Now give it direction.

Configure your mount, adapter and arm length directly on the product page. If your installation is unusual, CoralPlast can design a custom solution.

See CP-SWEEP BORA

Video tutorials

First connection to your phone
Connect to your home Wi-Fi
Connect a Jebao pump

The SLW-M Wi-Fi and digital M generations (MLW/MOW/MCP) have documented AP procedures. ALW and the E-M, D-M and G generations are candidates requiring checks of the revision, protocol and adapter.

Open the controller guide