This comparison presents three solutions designed to automate the orientation of a circulation pump in a marine aquarium: CP-SWEEP BORA, TUNZE ORCA MK2 and NEO3PLUS NEOSCI / MOTIONXCON.
CoralPlast compares the three systems using published technical characteristics, control methods, compatibility, installation options and prices, without establishing a qualitative ranking between products.
Motorized oscillator for reef aquarium circulation pumps
Motorized rotary unit for circulation pumps
Motorized oscillator system for circulation pumps
Current promotional price. Checkout is completed through the main CoralPlast French store.
Four views of CP-SWEEP BORA show the motor housing, arm, pump mount and aquarium mounting system from different perspectives. They make it easier to assess the real installation before ordering.
Check the available pump compatibility and mounting options, or go directly to the purchase page. For unusual installations, CoralPlast can help verify the most suitable configuration.
With compatible Jebao/Jecod models, CP-SWEEP BORA can combine mechanical movement and electronic pump control in the same graphical interface.
With compatible Jebao/Jecod models, CP-SWEEP BORA can combine mechanical movement and electronic pump control in the same graphical interface.
The SLW-M Wi-Fi and digital M generations (MLW/MOW/MCP) have documented AP procedures. ALW and the E-M, D-M and G generations are candidates requiring checks of the revision, protocol and adapter.
Wi-Fi or Wi-Fi + Bluetooth alone does not guarantee electronic compatibility. Bluetooth-only controllers are excluded. DMP and GMP, with the motor outside the glass, are mechanically incompatible with Sweep.
CP-SWEEP BORA, TUNZE ORCA MK2 and NEO3PLUS NEOSCI / MOTIONXCON are motorized systems intended to automatically change the orientation of a circulation pump. The differences mainly concern architecture, control interface, compatibility, assembly and functions.
| Feature | CP-SWEEP BORA | TUNZE ORCA MK2 | NEO3PLUS NEOSCI / MOTIONXCON |
|---|---|---|---|
| System type | Motorized rotary unit for circulation pump. Electronic control with local management Wi-Fi. | Motorized rotary unit for circulation pump. Electronic control via TUNZE Reef Assistant. | Motorized rotary unit for circulation pump. NEOSCI with servomotor controlled by MOTIONXCON. |
| Movement and orientation | Electronically configurable movement and orientation through the local graphical interface CP-SWEEP. Adjustable angle from 0 to 180° : centre, width, speed and programming. | Electronically configurable movement and orientation via TUNZE / Reef Assistant. The direction and intensity of the flow can be coordinated. | Configurable movement by MOTIONXCON, sector up to 180°, adjustable limits and speed. |
| Motorization and positioning | Stepper motor + 4:1 gearbox, 32-bit control, magnetic encoder, automatic reference and location monitoring. | Motorized system with magnetic encoder for location detection. | servomotor with stainless steel gears, controlled by MOTIONXCON. |
| Control interface | Local Wi-Fi web interface, accessible from browsers on smartphones, tablets or computers. No proprietary apps and no mandatory cloud. | Software control via TUNZE / Reef Assistant. | Control through the dedicated unit MOTIONXCON. |
| Direct pump control | Yes, with Jebao/Jecod compatible. SLW-MMLW / MOW / MCP Non-exhaustive list; excluding models exclusively BLE.The SLW-M Wi-Fi and digital M generations (MLW/MOW/MCP) have documented AP procedures. ALW and the E-M, D-M and G generations are candidates requiring checks of the revision, protocol and adapter. DisclaimerWi-Fi or Wi-Fi + Bluetooth alone does not guarantee electronic compatibility. Bluetooth-only controllers are excluded. DMP and GMP, with the motor outside the glass, are mechanically incompatible with Sweep. | Yes, with compatible TUNZE pumps. ORCA can coordinate direction and intensity of flow through Reef Assistant. | MOTIONXCON mainly controls the movement of oscillators NEOSCI. |
| Programming | Center, amplitude, speed, available times and functions of the compatible pump. | Motion and flow parameters configurable by Reef Assistant. | Limits, angles and configurable speeds via MOTIONXCON. |
| Location reference | Automatic reference and repositioning. Restoration of reference after power failure or switched off. | Magnetic encoder for precise location detection. | Positioning managed by the servomotor according to the limits set in MOTIONXCON. |
| Glass and assembly | Standard vertical up to 20 mm, horizontal up to 15 mm. Arm in PVC pressure Ø20 mm, up to 50 cm, customizable. | Support up to 22 mm and adjustable carbon fiber tube. | Support up to 20 mm, vertical or horizontal mounting. |
| Mechanical compatibility | Supports for different pump families; specific adjustments evaluated on request when technically feasible. | Designed for TUNZE pumps compatible with the ORCA system. | Plate NEOSCI for many models of circulation pumps. |
| More oscillators | Each CP-SWEEP standard has its own controller and can be configured independently. | Compatible units integrated into the ecosystem TUNZE. | A MOTIONXCON can handle up to three NEOSCI. |
The prices are indicated for information and correspond to the values displayed at the time of verification. They can change.
Price CoralPlast verified on 27/09/2026.
Unit price ORCA MK2 verified on shop TUNZE.
Price included in the package MOTIONXCON Only checked at NEO3PLUS.
Several systems allow to automate the orientation of a circulation pump. CP-SWEEP BORA and NEO3PLUS NEOSCI / MOTIONXCON respond to the same general need of TUNZE ORCA MK2, with different architectures.
Both are motorized rotary units. CP-SWEEP uses a local Web interface Wi-Fi and can control some compatible Jebao/Jecod pumps; TUNZE ORCA MK2 uses Reef Assistant and can coordinate the orientation and flow of compatible TUNZE pumps.
Yes, with Wi-Fi compatible models. Documented families include M/MW, SLW, MLW, ALW, MCP and ELW; some generations are also supported Wi-Fi + BLE.
No. The controller creates its own network Wi-Fi and its interface is available locally via browser.
CP-SWEEP uses a stepper motor with reducer and a local Wi-Fi controller. NEO3PLUS uses a NEOSCI servomotor commanded by MOTIONXCON.
Technical data and prices verified on 27 September 2026. Competitive brands are cited exclusively to clearly identify compared systems.
Features, local interface, programming, assembly, compatibility and price.
https://Reef Assistant, magnetic encoder, mounting up to 22 mm and public price.
https://servomotor, MOTIONXCON, assembly and price of the Solo package.
https://NEO3PLUS.com/en/oscillateurs/395-osmolateur-digiosm. htmlCheck pump compatibility, choose the mounting configuration and arm length, or contact CoralPlast if your installation needs a specific fit.